Windows Hack Code

16/12/2009 12:24

Five Lives of Win XP

Posted by jaiminworld on September 23, 2008

Everytime you
boot, you get the
dreaded Blue
Screen of Death.
Or, though your PC does boot, you
never get to see the desktop or use
your applications and files. Everyone
gives you the same verdict—
re-install everything.Try these five
steps before doing that to save both
time and your data.
For some of these to work, you
should take preventive measures
earlier.Each of these can be implemented
without using any software
or tool other than that on your
Win XP CD-ROM.

System Restore

Where to find it: Start>Programs>
Accessories>System Tools
This is the fastest recovery
route, since Win XP already does
most of the groundwork for you.
All you have to do is to make sure
that System Restore is turned on.
To do this, open Control
Panel>System.Click on the System
Restore tab and check off the ‘Turn
off System Restore’ box.If you have
more than one hard drive, you will
get a box with each drive and its
setting listed. Click on each one,
then click on Settings and set up
the amount of space it should use.
Now, each time your system
reaches specific checkpoints—
such as software installation, uninstallation
and hardware
change—Win XP will automatically
save important system files
and settings.You can also create a
specific restore point by launching
System Restore and choosing ‘Create
a restore point’.
Now, if the system becomes unusable,
launch System Restore.
Choose ‘Restore my computer to an
earlier time’ and click on Next. Select
the date when you last used
your PC without problems and XP
will automatically restore the files
and settings from that date. Note
that you can only select dates
shown in bold. You would need to
reboot your PC after this is done to
finish recovering your PC.

Backup and Restore

Where to find it: Start> Programs>
Accessories>System Tools
This is a manual method.After
launching it, click on Backup and
check on the specific drives or folders
to back up. To back up the system-
state (same as System
Restore), check on the ‘System
State’ option under ‘My Computer’
in the left-side tree.At the bottom
of the box, select a path and provide
a file name for your backup
(.bkf ) file. Click on ‘Start Backup’
to begin.
To restore, simply return to this
utility in Safe Mode.Select the ‘Restore
and Manage Media’ tab. Select
your backup file from the pane
on the right and click on ‘Start Restore’.
It’s a good idea to reboot
your PC when this finishes.

ASR (Automated System Recovery)

Where to find it: Backup Utility,
Win XP installer
To use ASR, you need to create
an ASR floppy disk.To use this ASR
floppy, you need to boot the Win
XP installer in the Recovery mode.

Hardware profiles

Where to find it: Control
Panel>System>Hardware
Hardware profiles help you
start your PC using a different
hardware configuration. For example,
if you have a notebook that
connects to your office network
and a home LAN,then you can use
the hardware profile system to
store different profiles for each of
these environments.This can also
be used to recover your PC to a
previous profile.What happens is
that for more than one hardware
profile created on your PC, when
XP boots up,you will be prompted
to select a profile to use.
To create a profile, access the
utility and create a copy of the default
profile (‘Profile 1′). If you’re
using a notebook, select each profile,
click on Properties and check
on the ‘This is a portable computer’
box.If you are using a docking port
with this notebook, check on the
‘The computer is docked’.To make
Win XP display this profile when
booting, check the ‘Always include
this profile as an option when Windows
starts’ option on.Click on OK
throughout.
To set up the hardware for each
profile, you need to reboot the PC
after the above step, in one of the
other hardware profiles.Now,go to
Device Manager (Control Panel>
Administrative Tools>
Computer Management).
Select the hardware,
right click on it
and select Properties
from the menu. If you
want to use this hardware
in this profile, select
‘Use this Device
(enable)’ in the ‘Device
Usage’ drop down at
the bottom. If you
don’t want to use it in
the current profile, select
‘Do not use this
device in the current
hardware profile (disable)’.
Selecting the
last option will disable
the device in all profiles,
making it unusable.
Click on OK when done.
Now when booting,XP will display
the created profiles for 30 seconds
(by default). If you don’t
make a selection, it will boot the
one already selected on screen.


Windows File Protection

Where to find it: Start>
Run>SFC
Win XP includes a background
process called ‘Windows File Protection’
to restore corrupt system
files automatically. This software
has a front end named SFC (System
File Checker). To manually
launch SFC, in the Start>Run box,
enter:
SFC/SCANNOW
Click on OK. A small progress
bar will be displayed depicting
scanning and restoring your system
files.You should have your Win
XP CD-ROM handy. To enable
proper working of this tool, start
your PC in Safe Mode (without networking).

Posted in WINDOWS Hack | Tagged: , , , | Leave a Comment »

Win XP PowerToys

Posted by jaiminworld on September 23, 2008

Win XP PowerToys

PowerToys add value and
fun to the built-in features
of Win XP. You can download
them separately from
http://microsoft.com/windowsxp/
downloa
ds/powertoys/xppowertoys.mspx.
Or you can find them on this
month’s PCQXtreme CD.Copy and
unzip all the power toys zip files to
your desktop. Then double click
and install each of them.Now let’s
see what each of them does.

Virtual Windows Manager

This is a very useful tool that
lets you manage four desktops
from your Windows
taskbar. You can open
different applications
on different desktops
and manage them
seamlessly. For example,
on one desktop you
can run a Word application
and on the other
an Excel file. You just
have to select the desktop
you want to work
on. To enable the Virtual
Windows Manager,
simply right click
on the taskbar and select
Toolbar> Desktop
Manager.

Task switcher

To switch between
applications, you generally
use Alt+Tab buttons.
However, after installing this
PowerToy, you can see the running
applications as thumbnails, while
switching between them using the
Alt+Tab buttons.

HTML slide show wizard

This wizard helps you create a
slide show of your digital photos in
HTML. To use it, click on
Start>Programs>Windows PowerToys>’
Slide Show Wizard’. This
brings up a wizard on your screen.
Click on Next. On the screen
shown, select the digital pictures
that you want on the HTML page.
Click on ‘Add Images’ button to
add files individually. Alternatively,
you can click on ‘Add folder’
button to add a folder, which contains
many pictures.Click again on
Next to continue. On the screen
that shows,give a name to the slide
show and also give the path where
you want to save the auto-generated HTML Web page.Now click on
Next and then on Finish. Now you
can use this HTML file on your
website,and run a slide show.However,
you need to upload the folder,
the wizard creates, to your website.

CD slide show generator

This PowerToy is much like the
HTML slide show wizard, except
that it creates slide shows directly
on the CD-R. To use this, you need
a CD-writer. It enables you to view
the slide show of the images burnt
on a CD-ROM. To create a picture
slide show on CD-ROM, add only
images to the CD-ROM using Explorer
and then write these files to
the disc. A new task is now presented
for generating the autorun
file, so that the show is automatically
launched when you insert the
CD-ROM.

Webcam timershot

This allows you to take pictures
from a Webcam connected to your
computer at specified time intervals.
A picture is taken and then
saved to a location with a name
that you specify.You can even save
the pictures to a network share, an
FTP share or an HTTP WebDAV
share.To use it,click on Start>Programs>
Windows
PowerToys>’Timer shot’.This will
open a Timershot configuration
window. Here, under the devices
section, select Webcam. Then in
the same window, set the time intervals
for taking pictures.Also set
the location where you want to save
the pictures. Then, click on ‘Apply
Settings’ to save the settings.

Command here

This is another useful Power-
Toy that adds an ‘Open Command
Window Here’ context menu option
to file system folders.Now you
can quickly open a command window
by just right clicking on the
folder. Else you will have to type
‘cmd.exe’ from Start>Run to
launch a command window and
then ‘cd’ to that folder.

Image resizer

It resizes digital images without
using an editing software.You
can resize one or many image files
in one go.For this,right click on the
picture files and from its context
menu select ‘Resize Pictures’. On
the window you get, select what
you want to resize.

Tweak UI

You can explore system setting
of your Win XP machine with this
toy.You can configure Explorer settings,
taskbar settings, My Computer
settings, and many others,
without going to the control panel.
To use this toy, click on Tweak
UI from Start>Programs>Windows
Power Toys.Here,you will get
an interface consisting of object on
the left and its setting on the right
window panel. For example, if you
want to set (click speed,hover sensitivity,
etc) your mouse to your
liking, select mouse object from
the Tweak UI interface and set its
speed and sensitivity according to
your ease.

Taskbar magnifier

This one allows you to magnify
a part of the screen on the taskbar.
You will see the magnified part of
the area, which is pointed by the
mouse.
To activate it, right click on the
taskbar and then click on the toolbar.
Finally click on ‘Taskbar Magnifier’.

Posted in WINDOWS Hack | Tagged: , , , | Leave a Comment »

Delete an “UnDeletable” File

Posted by jaiminworld on September 23, 2008

Hello Friends, this Tutorial is for all those who want to delete some files but they cannot delete them due to some reasons.  Well this is a Full Proof way of deleting any Damn File. After Deleting the File in this way there won’t be any trace of that File on your computer.

Beware : Make sure that the file you are Deleting is not a System File.

  1. Open a Command Prompt window and leave it open.
  2. Close all open programs.
  3. Click Start, Run and enter TASKMGR.EXE
  4. Go to the Processes tab and End Process on Explorer.exe.
  5. Leave Task Manager open.
  6. Go back to the Command Prompt window and change to the directory the AVI (or other undeletablefile) is located in.
  7. At the command prompt type DEL <filename> where <filename> is the file you wish to delete.
  8. Go back to Task Manager, click File, New Task and enter EXPLORER.EXE to restart the GUI shell.
  9. Close Task Manager.

Or

you can try this

  1. Open Notepad.exe
  2. Click File>Save As..>
  3. Locate the folder where your undeletable file is
  4. Choose ‘All files’ from the file type box
  5. Click once on the file u wanna delete so its name appears in the ‘filename’ box
  6. Put a ” at the start and end of the filename
    (the filename should have the extension of the undeletable file so it will overwrite it)
  7. Click save,
  8. It should ask u to overwrite the existing file, choose yes and u can delete it as normal

Here’s a manual way of doing it. I’ll take this off once you put into your first post zain.

  1. Start Run Type: command
  2. To move into a directory type: cd c:\*** (The stars stand for your folder)
  3. If you cannot access the folder because it has spaces for example Program Files or Kazaa Lite folder you have to do the following. instead of typing in the full folder name only take the first 6 letters then put a ~ and then 1 without spaces. Example: cd c:\progra~1\kazaal~1
  4. Once your in the folder the non-deletable file it in type in dir – a list will come up with everything inside.
  5. Now to delete the file type in del ***.bmp, txt, jpg, avi, etc… And if the file name has spaces you would use the special 1st 6 letters followed by a ~ and a 1 rule. Example: if your file name was bad file.bmp you would type once in the specific folder thorugh command, del badfil~1.bmp and your file should be gone. Make sure to type in the correct extension.

Posted in WINDOWS Hack | Tagged: , , , , , | Leave a Comment »

Hacking Windows Administrator Password

Posted by jaiminworld on September 17, 2008

This article introduce very simple way to hack Administrator Password on Win XP System.This tutorial tells you how to break administrator password and gain access to admin account.Also if you need to crack/reveal the password you find the steps here to accomplish that also.

First of all let us have a close look at the Security flaws/Loopholes in Win XP

Microsoft stores all Security Information in many files but the main file is the SAM file (Security Accounts Manager)! this file contain security information about users(mainly Password).You can explore the SAM file here in this folder

$windows\system32\config

SAM is the file which contains the passwords in the form of a HASH.A HASH is a mathematically irreversible form of encryption,so that theres no way of decrypting the password back .Also there’s a file called SECURITY that contains a list of all users in the system & their related information

We will Not be able To copy them Under XP since it doesn’t support any attempt to copy this file.

The Idea Behind Cracking the password

The Idea is simple I will explain it manually and it can also be programmed.Here’s the idea..

The SAM contain’s a Security Information(password/s), so I have created a Free Windows XP SP2 Logon account (Administrator Account without password) that means when windows Launch it Will enter directly to the system without asking about any password.So, this SAM file contain’s an open password(no password).If you have two operating system then you can get this type of SAM file from another operating system for your further use in breaking the password of the system.

So, the idea here is to replace the SAM file of victim’s computer(which contain’s password) with the SAM file which contains no password.When this is done the password of the victim’s account is erased and it let’s anyone to login to the computer as if there is no password set by admin.

But this SAM file cannot be manipulated(copy/rename/replace/delete) when the operating system is running.So here are some of the ideas to replace this SAM file.

1.If there are two OS installed on the computer we can boot from other OS and replace the SAM file located at

$:\windows\system32\config

2.If there is only a single OS then use the tool NTFS4DOS (http://www.free-av.com/antivirclassic/avira_ntfs4dos.html) to access the location of the SAM and SECURITY files from the boot command prompt.

NTFS4DOS creates a bootable floppy disk.You can use this floppy to access the NTFS drives by booting the system and mounting it to DOS.

Here are the steps to be followed to break the password.

1- Get the SAM file from another OS.

2- Go to the target Machine , and try to Access it by Booting from the floppy created by NTFS4DOS or by other OS(incase you have two OS installed)

3- After Getting Access to the Boot Command prompt c:> Go to the config folder

$windir$\system32\config

And Copy the SAM File and SYSTEM File(we will need it later) To other any folder, Then replace the original SAM file(In $windows$\system32\config) with the SAM file i have provided

5- Reboot and Make windows enter Normally

6- Yeah, Now you can directly enter the system without any password. ie:The PW is broken!.

Now you have broken the system administrator password and you can directly enter system.Now one phase of the password hack is over.If you need to know/crack the admin password then you can use the two files SAM & SECURITY that you have copied in the above STEP-3(This step is optional).It is done as follows.

Download any of the following Password crackers

1.LC4 (Lophtcrack).New version is LC5

OR

2.SAMINSIDE

LC5 is better according to me

Once you have either of the two password cracking tools,you can load the SAM & SECURITY files and start the cracking process.This process may take a long time since it is Bruteforce method depending on the size of the password.

NOTE: THE ABOVE METHOD IS ALSO APPLICABLE FOR WINDOWS VISTA

WARNING: THE ABOVE INFORMATION IF FOR EDUCATIONAL PURPOSES ONLY

Posted in WINDOWS Hack, Windows Password Hack | Tagged: , , , , , , | 1 Comment »

Hack Administrator by bootable device

Posted by jaiminworld on September 17, 2008

Here we present the rock solid windows hacks
for educational purpose only!

This
is a utility to (re)set the password of any user that has a valid
(local) account on your Windows NT/2000/XP/2003/Vista system, by
modifying the encrypted password in the registry’s SAM file.
You do not need to know the old password to set a new one.
It
works offline, that is, you have to shutdown your computer and boot off
a floppy disk or CD. The boot-disk includes stuff to access NTFS
partitions and scripts to glue the whole thing together.
Works with syskey (no need to turn it off, but you can if you have lost the key)
Will detect and offer to unlock locked or disabled user accounts!
Caution:
If used on users that have EFS encrypted files, and the system is XP or
later service packs on W2K, all encrypted files for that user will be
UNREADABLE! and cannot be recovered unless you remember the old
password again!
Download links:
cd070409.zip (~3MB) – Bootable CD image with newer drivers
bd050303.zip (~1.1MB) – Bootdisk image, date 050303.
sc050303.zip(~1.4MB) – SCSI-drivers (050303) (only use newest drivers with newest bootdisk, this one works with bd050303)
To
write these images to a floppy disk you’ll need RawWrite2 which is
included in the Bootdisk image download. To create the CD you just need
to use your favorite CD burning program and burn the .ISO file to CD.

Posted in WINDOWS Hack, Windows Password Hack | Tagged: , , , , , , | Leave a Comment »

Hack Administrator password after logon

Posted by jaiminworld on September 17, 2008

You can change Administrator password from guest account without using any programs. It’s easy:
1. Start-> Run, type lusrmgr.msc and hit Enter.
2. You will see window with two folders:Users and Groups. Go in the Users folder, find the Administrator, right click-> Set Password and now you can change the password without knowing the old one.

Posted in WINDOWS Hack, Windows Password Hack | Tagged: , , , , , , | Leave a Comment »

Hack the password from command prompt

Posted by jaiminworld on September 17, 2008

1.Open command prompt (Go to :Start > Run and type : cmd).
2.Type following command :

There are two commands you can use any one of them

1.net user “username” “password”

OR

2.control userpasswords2 “username” “password”

where “username” is username of account you want to hack and “password” is password that you want that is of your choice.

Posted in WINDOWS Hack, Windows Password Hack | Tagged: , , , , , , | Leave a Comment »

Changing Windows Administrator Password Without Knowing It

Posted by jaiminworld on September 17, 2008

Yes it is possible to change Adminstrator password both in Win XP and Vista without knowing it.If you somehow manage to login as an Administrator then you can change the password without knowing it.

Heres the Step-By-Step instructions

1. Right-click on the “My Computer” icon on the desktop OR in the Start Menu.

2. Select the option “Manage”.

3. On the left pane expand the “Computer Management (Local) tree (if it is not already expanded)

4. Double click “Local Users and Groups” option From “System Tools” tree.

5. Click the “Users” option.

6. Now you will see the list of users on the right side pane,such as Administrator,Guest etc.

7. Right click the “Administrator” and select the option “Set Password” option.

8. Now you will see a warning message,Click on proceed.

9. Now the system asks you for “New Password” and “Confirm Password” .

10. After entering the password click on “OK”.The password is changed.That’s It!

Posted in WINDOWS Hack, Windows Password Hack | Tagged: , , , , , | 1 Comment »

Hack Account password from administrator

Posted by jaiminworld on September 17, 2008

Note : If there is no administrator password then this trick works.

1.Reboot Computer.
2.Press F8 and go in the Safe mode.
3.Open control panel and then open User accounts.
4.Change the password.

U hav finished.

Back